Epson LQ-2080 - Page 130

5-10
Changing Printer Settings From the Printer’s Control Panel
R4C3730
Rev. C
A5 size CHAP5.FM
8/23/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
2. Hold down the
Condensed
button while you press the
Operate
button to turn on the printer. The printer enters the
default-setting mode and prints the language selection
instructions (one page).
3. Press the
Font
button until the
Font
lights indicate the
language you want, as described in the language selection
instructions.
4. Press the
Condensed
button to print the default-setting
mode instructions (two pages) in the language you selected.
The printed instructions list the default settings you can
change, describe how to change them, and show you how the
control panel lights help you make settings. Follow these
instructions to change the default settings using the buttons
on the printer’s control panel.
Note:
The arrows on the instruction sheets indicate the printer’s current
settings.
5. When you finish making settings, press the
Operate
button
to turn off the printer and exit the default-setting mode. Any
settings you have made remain in effect until you change
them again.
Note:
You may exit the default-setting mode by turning off the printer while
the printer is not printing.