A-8
Enhancing Your Printer With Options
R4C3730
Rev. C
A5 size Appa.fm
8/23/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
6. As shown below, set the cut-sheet feeder’s paper type lever to the proper
position for the paper you will load: single-sheet paper and singe-sheet
multi part forms, or postcards and envelopes.
Note:
Always set the paper type lever before you load paper.
7. Pull both paper set levers forward until the paper guides retract and
lock open to allow paper loading.
8. Take a stack of paper (up to 150 sheets of plain paper) and fan it.
Next, tap the side and bottom edges of the paper on a flat surface to
even up the stack.
9. Insert the paper stack printable side down along the left paper guide.
envelopes or postcards
single-sheet paper or
single-sheet multi part
forms
4-3aa.eps
4-3.eps
To Next Page
Loading...
