3
Printing on Single Sheets
3-3
R4C3730
Rev. C
A5 size CHAP3.FM
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
The table below shows the types of paper you can load in the top
and front paper slots and the paper thickness lever settings for
each paper type. For more information on the paper thickness
lever, see page 2-3.
Note:
❏
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
❏
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print
quality.
❏
Do not load paper that is damaged, curled, or has been folded.
Paper type Available
paper slots
Paper thickness
lever position
Ordinary single-sheet paper Top and front -1 or 0
multipart forms (carbonless)
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
Top and front
1
2
3
5
Postcards Top and front 2
Envelopes Top 2 to 6
To Next Page
Loading...
