7
Troubleshooting
Troubleshooting
7-13
Sun-E+
Rev. C
A5 size Chap7.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Part of the printout is missing, or dots are missing in random
positions.
Cause What to do
The ribbon has too much
slack, the ribbon has come
loose, or the ribbon cartridge
is not installed properly.
Remove any slack in the ribbon by
turning the ribbon-tightening knob, or
reinstall the ribbon cartridge as
described in Chapter 1.
The ribbon is worn out. Replace the ribbon cartridge as
described in Chapter 1.
Lines of dots are missing in the printout.
Cause What to do
The print head is damaged. Stop printing and contact your dealer
to have the print head replaced.
c
Caution:
Never replace the print head yourself; you may damage the printer. Also,
other parts of the printer must be checked when the print head is replaced.
All the text is printed on the same line.
Cause What to do
No line feed command is
sent at the end of each line of
text.
Turn on the auto line feed setting
using the printer’s default-setting
mode or the EPSON Remote! utility so
that the printer automatically adds a
line feed code to each carriage return.
See “About Your Printer’s Default
Settings” in Chapter 5 or “Using the
EPSON Remote! Utility” in Chapter 4.
To Next Page
Loading...
