Epson LS20-BA04S - Specifications; Features of LS20-B Series Manipulators

Setup & Operation 2. Specifications
14
LS20-B Rev.4
2. Specifications
2.1 Features of LS20-B series Manipulators
The LS20-B series Manipulators are advanced manipulators pursuing high speed and high
cost-performance. The features of the LS20-B series Manipulators are as follows:
Large capacity
It improves the U-axis allowable moment up to 1.00 kg·m
2
.
Handle large loads stably by optimized control based on the each load.
Tact time improvement by high-speed motion
It improves the tact time of delicate movements by acceleration/deceleration speed
optimized for each payload and stop short technology.
Ethernet connector for camera cable is equipped by default
Ethernet connector is equipped on Arm #2 and base of the manipulator by default.
Easier to equip a camera (option: Vision Guide) than the conventional models.
Simplify the connection and disconnection of M/C cable
Connect the M/C cable and the cable inside the manipulator with the connector.
Easy to connect and disconnect the M/C cable and easier to transport the manipulator
than the conventional models.