Maintenance 2. General Maintenance
LS20-B Rev.4 65
The manipulator operation hours can be checked in [Controller Status Viewer] dialog box -
[Motor On Hours].
(1) Select EPSON RC+ menu-[Tools]-[Controller] to open the [Controller Tools] dialog
box.
(2) Click the <View Controller Status> button to open the [Browse For Folder] dialog
box.
(3) Select the folder where the information is stored.
(4) Click <OK> to view the [Controller Status Viewer] dialog box.
(5) Select [Robot] from the tree menu on the left side.
For the parts subject to overhaul, refer to Maintenance 14. Maintenance Parts List.
For details on replacement of each part, refer to the Maintenance section.
Please contact the supplier of your region for further information.
To Next Page
Loading...
