Installing the Projector 15
Installing the Projector
To install the projector, you first need to determine the location, based on the size of your
screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the
projector.
To suspend the projector from the ceiling, you will need the optional projector mount. See
page 10 for ordering information. Follow the instructions included with the mount to install
the projector.
Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the
screws from loosening and do not use any type of oil or lubricant. These may cause the projector
casing to crack and the projector may fall, causing serious injury and serious damage to the
projector.
If you install the projector on the ceiling, you will need to invert the picture so that it appears
right side up. Follow these steps:
1. Turn on the projector.
2. Press the
Menu button on the remote control.
3. Open the
Extended menu, then select Projection.
4. Select
Front/Ceiling.
5. Press the
Menu button when done.
80 in.
(203.2 cm)
88.6 to 106.3 in.
(225 to 270 cm)
3.9 in.
(10 cm)
100 in.
(254 cm)
110.6 to 133.1 in.
(281 to 338 cm)
4.7 in.
(12 cm)
120 in.
(305 cm)
133.1 to 160.2 in.
(338 to 407 cm)
5.5 in.
(14 cm)
150 in.
(381 cm)
166.9 to 200.4 in.
(424 to 509 cm)
7.1 in.
(18 cm)
200 in.
(508 cm)
222.8 to 267.7 in.
(566 to 680 cm)
9.4 in.
(24 cm)
320 in.
(812.8 cm)
357.1 to 428.7 in.
(907 to 1089 cm)
15.4 in.
(39 cm)
16:10 aspect ratio (continued)
Diagonal image size Projection distance Offset
To Next Page
Loading...
