Connecting Computer Equipment 29
Installing the USB Driver
You can send video and audio output to the projector through the computer’s USB port
(MG-850HD only) if your computer meets the system requirements (see page 78).
1. Turn on your computer.
2. Connect the cable to your projector’s USB
TypeB port.
3. Connect the other end to any available USB port on your computer.
4. Do one of the following:
■ Windows 7/Windows Vista: Select Run EMP_UDSE.exe in the dialog box that
appears to install the Epson USB Display software.
■ Windows XP: Wait as messages appear on your computer screen and the projector
installs the Epson USB Display software on your computer.
■ Windows 2000: Select Computer > EPSON_PJ_UD and then click
EMP_UDSE.EXE to install the Epson USB Display software.
■ Mac OS X: The USB Display setup folder appears on your screen. Select USB
Display Installer
and follow the on-screen instructions to install the Epson USB
Display Software.
Follow any on-screen instructions. You need to install this software only the first time you
connect your projector to your computer via USB. Once connected, the projector displays the
image from your computer’s desktop and outputs sound, if your media contains audio.
VGA Use a Mini D-sub, 15-pin monitor cable
to connect to a computer RGB
(monitor) port
Computer
port Cable Projector port
To Next Page
Loading...
