Fine-tuning the Image 43
Fine-tuning the Image
You can use the Image menu to adjust the brightness, sharpness, color, tint, contrast, and auto
iris settings.
1. Press the
Menu button on the projector or remote control and select the Image menu.
You see a screen similar to one of these:
Note: If you are using the HDMI port, you see the menu on the left if the signal is digital RGB
video, or the menu on the right if the signal is component video.
2. Adjust the desired options as needed.
Note: The available settings vary depending on the input source selected.
The Brightness setting changes the opacity of the projector’s LCD panels. You can also
change the lamp’s brightness. Select Power Consumption in the Settings menu, then choose
Normal or ECO (the default setting is Normal).
■ Color Mode
Lets you quickly adjust the color and brightness for various environments. You can
save a different setting for each source. See page 39 for a description of each color
mode.
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
■ Color Saturation
Adjusts the color depth of the image.
Computer/RGB video
Component video/Composite video
To Next Page
Loading...
