Device Playback 25
Configuring the Screen Saver
After a set period of time, the projector may project a screen saver while playing music. You
can configure the screen saver display and when it will turn on.
To configure your screen saver:
1. Select
Setting > Screen Saver from the iPod menu.
2. Press r. Select from the following screen saver options:
■ Off: the display will not switch to a screen saver
■ Dialog: the projector will display the current song information
■ Black out: the display will turn black
3. To configure when the screen saver will turn on, select
Setting > Timeout. Select from
the following times:
■ 5 mins
■ 15 mins
■ 30 mins
To select a time, highlight the option and press the enter button.
Projecting Photos, Videos and YouTube Videos From Your
iPod, iPhone, or iPad
To project photos, videos taken on your device, or YouTube videos:
1. Turn on the projector and then connect your device.
2. Press on the remote control to switch playback control to your device.
Note: The projector screen turns black until you select play on your device.
To Next Page
Loading...
