22 Projecting From an iPod, iPhone, or iPad
Tip: If the iPod, iPhone, or iPad battery is low, the Dock light may not turn on. Keep the device
connected so it will charge. Once the Dock light turns on, you can play back content.
Note: When you turn off the connected device, the Dock light also turns off.
Removing Your iPod, iPhone, or iPad
1. To remove a device, gently hold the dock and pull the device straight up.
Note: It is safe to remove your device without turning it or the projector off first.
2. Close the dock by pushing it straight in until it clicks into place.
Caution: Always close the dock when not in use or before transporting the projector.
Light Status Condition
Light on The device is connected and you can play back content on
your device.
Light flashing There is a device connection error. Disconnect the device
and try connecting it again.
To Next Page
Loading...
