Epson Perfection 1250 - Overview; Lubrication

EPSON Perfection 1250/1250 PHOTO Maintenance
41
5.1 Overview
Perform cleaning when dirt is noticeable or affects the quality of scanned
images.
!
Document Glass
Clean with a soft, dry cloth. If necessary, you may use a neutral detergent,
and then wipe it dry.
!
Outer Case
Clean with a slightly moistened cloth. To remove stubborn stains, use a
neutral detergent.
5.1.1 Lubrication
You need to lubricate the carriage assembly if you have replaced it or it begins
making abnormal noise. Refer to the following tables for recommended grease
type and application points.
Table 5-1. Recommended Grease
Table 5-2. Lubrication Points
Figure 5-1. Lubrication Point
C A U T I O N
Never use organic solvents such as thinner or benzene to
clean the scanner.
Grease Type Contents Part Number Availability
G-26 40g B702600001
EPSON product;
not commerically
available
Figure Lubrication Points Lubrication
5-1 Drive pulley shaft G-26 (1.0x3mm)
5-2 Tensioning pulley shaft G-26 (1.0x3mm)
5-3 CR shaft G-26 (1.0x3mm)
C A U T I O N
Excessive lubrication may cause damage to the carriage
mechanism.
Drive Pulley Shaft