15
To use PictureMate Pal with your computer, you must
first:
● Install the PictureMate Pal software
on your computer from the
PictureMate Pal CD as described
here.
● Connect PictureMate Pal to
your computer with a USB
cable. If you don’t have a
USB cable, you can buy one
from your local computer
dealer or from Epson.
Once your software is installed and PictureMate Pal is
connected to your computer, you can:
● Save photos to your computer (see page 20)
● Print photos from your computer on PictureMate
Pal (see page 20)
Tip: Periodically, it’s a good idea to check Epson’s support
website at epson.com/support for free updates to your
PictureMate Pal printer software. Download instructions are
posted for your convenience.
Installing Software and Connecting
PictureMate Pal
DO NOT connect PictureMate Pal to your computer
before installing the software.
REMOVE your memory card from PictureMate Pal
before you begin.
Follow the installation steps for your computer:
● Windows (below)
● Macintosh (page 18)
Note: If you have problems installing the software, see page 45.
Installing Software for Windows
1
Make sure PictureMate Pal is NOT connected to
your computer and does NOT have a memory
card inserted in it.
2 Press the On button to turn on PictureMate
Pal.
3 Turn on your computer.
Save Your Photos and Print From a Computer
To Next Page
Loading...
