Epson PictureMate Pal PM 200 - Adjusting Borderless Expansion and Other Settings

38
You can change the way PictureMate Pal works as
follows:
● Adjust the amount of expansion used in
borderless printing
● Turn print preview on or off
● Adjust the photo viewer screen contrast
● Return the settings to the original defaults
Adjusting Borderless Expansion
When you print borderless photos, your images are
automatically expanded. If too much of your photos
are cut off around the edges, you can adjust the
amount of expansion.
1 Press Menu.
2 Press l or r to highlight Borderless Exp and press
OK.
3 Press l or r to select MIN (to reduce the amount
of expansion).
4 Press OK.
5 Press Cancel to exit.
If you see white edges on your photos, repeat these
steps, but select MID or MAX.
Set PictureMate Pal Preferences