30
PictureMate Pal can print photos stored on a:
● PictBridge- or USB DIRECT-PRINT-enabled digital
camera (below)
● Bluetooth-enabled device (requires an optional
Bluetooth Photo Print adapter. See page 31)
Printing From a Camera
You can connect a digital camera that supports
PictBridge or USB DIRECT-PRINT printing to
PictureMate Pal and use the camera to control
printing. (Check your camera manual to see if it
supports PictBridge or USB DIRECT-PRINT. A cable may
not be included with your camera.)
1 Make sure PictureMate Pal is on but not printing.
2 Make sure there are no memory cards in
PictureMate Pal’s slots.
Note: You must remove your memory card or the printer
will read photos from the card, not from a camera.
3 Turn on your camera.
4 Connect your camera’s USB cable to your camera
and the port on the back of PictureMate Pal.
5 Use your camera’s controls to select and print
photos on PictureMate Pal. (See your camera
manual for instructions.)
Print From a Digital Camera or Bluetooth Device
To Next Page
Loading...
