6
4 Slide the edge guides outward.
5 Create a stack of up to 20 sheets of paper and
separate the sheets slightly by fanning them.
6 Place your paper into the slot between the edge
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
Note: Load a maximum of 20 sheets at a time. Load
your paper glossy or whiter side up to prevent smearing.
7 Store any unused paper in the original package
and keep it flat in a dry area to prevent curling.
Note: When you need more paper, order a PictureMate 200
Series Print Pack. See page 33 for more information.
Inserting Your Memory Card
1 Press the On button to turn on PictureMate
Pal.
2 Press the Open button to open the output tray, if
necessary.
3 Insert the memory card into the correct slot, as
shown on the next page. Insert just one card at a
time.
Note: PictureMate Pal can’t read multiple cards at once.
4 Push the card in carefully until it stops (it won’t go
in all the way).
When the card is in, the memory card light comes
on.
Load glossy or
whiter side up
Make sure paper
is beneath arrow
on edge guides
To Next Page
Loading...
