17
8 Click OK. After a moment, you see this screen:
9 Connect the USB cable to any open USB port on
your computer. Then connect the other end to the
USB port on the back of PictureMate Pal.
The installer installs your PictureMate Pal software.
Note: If you see a screen like this one, remove your
memory card and click the
X in the window to close it.
10 When you see the screen below, click No if you
have another printer connected to your computer.
If PictureMate Pal is your only printer, click Yes.
To Next Page
Loading...
