Epson PictureMate PM 240 - Printing Selected Photos

28 Basic Photo Printing PictureMate PM 240 / PM 280
Note:
If you want to set the number of copies for
specified photos only, set the copies for all first,
then select the photo you want to increase and
press the OK button until you see the desired
number of copies. To decrease the number of
copies, press the left soft key.
5. To make optional settings, see “Printing Options”
on page 32.
6. Press the right soft key to preview the print
settings.
7. Press the right soft key to open the Paper/Layout
menu.
8. Press the d button to highlight the desired paper
size, then press the right soft key.
9. Press the d button to highlight the desired layout,
then press the right soft key.
10. Press the z Print button to start printing.
Note:
If there is DPOF information on the memory card,
PictureMate goes to DPOF print mode. See “Printing
Camera-Selected DPOF Photos” on page 31 for
details. To print all of the photos on the memory card,
press the Cancel button and follow the steps above.
Printing Selected Photos
1. Press the u, d, l, or r button to highlight the
photo you want to print, then press the OK button.
The copy number for that photo is set to 1.
2. If you want to increase the number of copies,
press the OK button until you see the desired
number. To decrease the number of copies, press
the left soft key.
3. Repeat the steps 1 and 2 for additional photos.
4. To make optional settings, see “Printing Options”
on page 32.
5. Press the right soft key to preview the print
settings.