Epson PictureMate PM 240 - Setting Picturemate Preferences; Set Operation Sound on or off; Setting the after Printing Confirmation

50 Setting PictureMate Preferences PictureMate PM 240 / PM 280
Setting PictureMate Preferences
Set Operation Sound On or Off
Set the Operation Sound setting to On to set
PictureMate to sound a tone, for example when an
error or warning occurs.
1. Press the Menu button.
2. Press the d button to highlight the Setup menu,
then press the right soft key.
3. Press the d button to highlight Operation Sound,
then press the right soft key.
4. Press the d button to highlight the setting you
want to change, then press the right soft key.
❏ Battery Status : Beeps when the battery is
low.
❏ Error Status : Beeps when the cartridge is
expended or the paper is out.
❏ Button : Bleeps when an invalid button is
pressed or grayed-out unavailable item is
selected.
5. Press the d button to highlight On, then press the
right soft key.
Setting the After Printing Confirmation
This setting lets you decide whether to keep the print
settings you selected or return the settings to the
default you selected in After Printing setting. For more
information on making your own default settings, see
“Changing the Default Print Settings” on page 51.
1. Press the Menu button.
2. Press the d button to highlight the Setup menu,
then press the right soft key.
3. Press the d button to highlight After Printing, then
press the right soft key.