PictureMate PM 240 / PM 280 Ink, Paper, and Options 77
Lithium Ion Battery
An optional rechargeable battery means you can use
PictureMate without the AC adapter.
Lithium Ion Battery C12C83108✽, model D121A
Note:
The asterisk is a substitute for the last digit of the
product number, which varies by location.
For details on using the optional battery, see the
following section.
Using the Optional Battery
Note:
❏ Install the battery after installing the first photo
cartridge and after ink charging is finished.
❏ You cannot save data on the memory card to an
external device when using the battery. Connect
the AC adapter to PictureMate when you save
data.
❏ When you copy data on a computer to your
memory card, confirm that there is enough power
in the battery. If the battery runs out, saving is
canceled, and corrupted data may remain on the
memory card.
For safety instructions for the battery, see “When using
the optional battery” on page 11.
Installing the battery
Follow the steps below to install the battery.
1. Make sure that PictureMate is turned off.
2. Unplug the AC adapter from the printer.
3. Press the release latch and remove the battery
cover as shown below.
To Next Page
Loading...
