PictureMate PM 240 / PM 280 Troubleshooting 69
Troubleshooting
The solutions herein are for problems when printing
without using a computer.
Error/Warning Messages
You can diagnose and solve most problems by
checking the error messages on the LCD screen. If
you cannot solve the problems, by checking the
messages, use the following table and try the
recommended solution.
PictureMate beeps or bleeps when an error occurs.
For details on the error sounds, see page 50.
Error Messages Solution
A printer error has
occurred. See your printer
documentation.
Turn PictureMate off and then back on.
If the error message still appears,
contact your dealer.
& See “Contacting Customer Support”
on page 75
PicturePack low. Replace
PicturePack soon.
Press the right soft key to clear the error.
Prepare the new PicturePack.
If you tried to clean the print head,
replace the PicturePack first.
& See “Replacing the PicturePack” on
page 58
Replace the PicturePack. Replace the PicturePack with the new
one.
& See “Replacing the PicturePack” on
page 58
Service required. Parts
inside your printer are near
the end of their service life.
See your printer
documentation.
Contact Epson for assistance.
& See “Contacting Customer Support”
on page 75
Service required. Parts in
your printer are at the end
of their service life. See
your printer
documentation.
Bluetooth adapter error.
Re-insert adapter.
Disconnect the Adapter, then reconnect
to the printer.
& See “Printing From a Bluetooth
Device” on page 45
Error Messages Solution
To Next Page
Loading...
