Epson PowerLite 119W User Manual

143
3. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
4. When all of the projector lights turn on, release the Menu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Saving Settings to a Computer
You can save the projector settings you want to transfer to a computer.
Your computer must be running one of the following operating systems:
• Windows 7
• Windows 8.x
• Windows 10

Epson PowerLite 119W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	16, 000:1
Weight	5.5 lbs (2.5 kg)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Display Technology	3LCD
Brightness	4000 lumens
Lamp Life	Up to 12, 000 hours (ECO Mode)
Connectivity	HDMI, VGA, USB
Throw Ratio	1.30 – 1.56
Speakers	16 W (Mono)
Projection Size	30 inches - 300 inches
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Power Consumption	310W (Normal), 225W (ECO)