Epson PowerLite 119W User Manual

27
Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Projector Connections
Installing Batteries in the Remote Control
Opening the Lens Cover
Projector Placement
You can place the projector on almost any flat surface to project an image.
You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Keep these considerations in mind as you select a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible mount.
• Place the projector parallel to the screen.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
Projector Setup and Installation Options
Projection Distance
Parent topic: Setting Up the Projector
Projector Setup and Installation Options
You can set up or install your projector in the following ways:

Epson PowerLite 119W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	16, 000:1
Weight	5.5 lbs (2.5 kg)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Display Technology	3LCD
Brightness	4000 lumens
Lamp Life	Up to 12, 000 hours (ECO Mode)
Connectivity	HDMI, VGA, USB
Throw Ratio	1.30 – 1.56
Speakers	16 W (Mono)
Projection Size	30 inches - 300 inches
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Power Consumption	310W (Normal), 225W (ECO)