Epson PowerLite 119W User Manual

188
Wireless LAN status (PowerLite X49/W49/118/119W/982W/992F/1288)
Wireless LAN light Status and solution
Blue Wireless LAN is available
Flashing blue quickly Connecting to a device
Flashing blue slowly An error has occurred; turn off the projector, then turn it back on
Off Wireless LAN is not available; make sure the wireless LAN settings are
correct
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related concepts
Projector Lamp Maintenance
Air Filter and Vent Maintenance
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Turning Off the Projector
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Home button on the projector or the remote control.
3. Press the arrow buttons to select Help.
4. Press Enter.
You see the Help menu.
5. Press the up and down arrow buttons to highlight the problem you want to solve.
6. Press Enter to view the solutions.

Epson PowerLite 119W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	16, 000:1
Weight	5.5 lbs (2.5 kg)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Display Technology	3LCD
Brightness	4000 lumens
Lamp Life	Up to 12, 000 hours (ECO Mode)
Connectivity	HDMI, VGA, USB
Throw Ratio	1.30 – 1.56
Speakers	16 W (Mono)
Projection Size	30 inches - 300 inches
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Power Consumption	310W (Normal), 225W (ECO)