Epson PowerLite 119W User Manual

153
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description
Resolution Auto
Wide
Normal
Sets the input signal resolution if
not detected automatically using
the Auto option
Aspect See the list of available aspect
ratios
Sets the aspect ratio (width-to-
height ratio) for the selected input
source
Tracking Varying levels available Adjusts signal to eliminate vertical
stripes in computer images

Epson PowerLite 119W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	16, 000:1
Weight	5.5 lbs (2.5 kg)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Display Technology	3LCD
Brightness	4000 lumens
Lamp Life	Up to 12, 000 hours (ECO Mode)
Connectivity	HDMI, VGA, USB
Throw Ratio	1.30 – 1.56
Speakers	16 W (Mono)
Projection Size	30 inches - 300 inches
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Power Consumption	310W (Normal), 225W (ECO)