Epson PowerLite 119W User Manual

166
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item Description
Projector Info See the table below
Version Displays the projector's firmware version
Temp Warning Info Displays various high temperature warnings
Power On/Off History
(PowerLite 992F/1288)
Displays the projector's power on and power off history
Projector Info menu
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been used in Power
Consumption modes; if the information is displayed in yellow, obtain
a genuine Epson replacement lamp soon

Epson PowerLite 119W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	16, 000:1
Weight	5.5 lbs (2.5 kg)
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Display Technology	3LCD
Brightness	4000 lumens
Lamp Life	Up to 12, 000 hours (ECO Mode)
Connectivity	HDMI, VGA, USB
Throw Ratio	1.30 – 1.56
Speakers	16 W (Mono)
Projection Size	30 inches - 300 inches
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Power Consumption	310W (Normal), 225W (ECO)