5. Use the arrow buttons on the remote control or projector to adjust the position of the image.
6. When you are finished, press the Menu button.
Note: The screen position cannot be adjusted if the Screen Type is set to 16:10 for the PowerLite
4750W or 4855WU models, or 4:3 for the PowerLite 4650.
Parent topic: Using Basic Projector Features
Displaying a Test Pattern
You can display a test pattern to adjust the projection image without connecting a computer or video
device.
Note: The test pattern's shape is determined by the Screen Type setting. Be sure to set the correct
screen type before adjusting with the test pattern.
1. Turn on the projector.
2. Press the Test Pattern button on the remote control or the down arrow button on the control panel.
76
To Next Page
Loading...
Need help?
General