To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description
Auto Setup On Automatically optimizes
computer image quality (when
Off
On)
Resolution Auto Sets the input signal resolution if
not detected automatically using
Normal
the Auto option
Wide
Tracking Varying levels available Adjusts signal to eliminate
vertical stripes in computer
images
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
3D Setup 3D Images Enables passive 3D images
when projecting from 2 projectors
(PowerLite 4855 only)
Progressive Off Sets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto
Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Noise Reduction Off Reduces flickering in analog
images in two levels (cannot be
NR1
set if Image Processing is set to
NR2
Fast)
125
To Next Page
Loading...
Need help?
General