5. Replace the wireless LAN module cover and secure it using the screw you loosened.
6. Close the air filter cover.
7. Plug in and turn on the projector.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only)
You can use the optional Quick Wireless Connection USB key to quickly connect your computer to the
projector wirelessly. Then you can project your presentation and remove the key when you are done.
Note: Make sure the optional wireless LAN module is installed and the projector is connected wirelessly
to your network.
1. Turn on the projector.
2. Press the LAN button on the remote control.
You see a screen like this:
54
To Next Page
Loading...
Need help?
General