EasyManuals Logo

Epson PowerLite 4750W Manual

Epson PowerLite 4750W
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
Press the A/V Mute button on the remote control to resume video and audio if they were temporarily
stopped.
Press the Source Search or Search button to switch to the correct input source, if necessary.
Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
Check the audio cable connections between the projector and your video source.
Make sure any connected audio cables are labeled "No Resistance".
If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac
supports audio through the HDMI port. If not, you need to connect an audio cable.
If you do not hear sound from an HDMI source, set the source to PCM output.
If you turn the projector on immediately after turning it off, the cooling fans may run at high speed
momentarily and cause an unexpected noise. This is normal.
Parent topic: Solving Image or Sound Problems
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Problems with the Remote Control
Solutions to Password Problems
Parent topic: Solving Problems
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
Make sure the power cord is securely connected to the projector and to a working electrical outlet.
The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
The power cord may be defective. Disconnect the cord and contact Epson.
If the projector's lamp shuts off unexpectedly, it may have entered sleep mode after a period of
inactivity. Begin a presentation to wake the projector.
If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated
and shut off. Check the solutions for this light status.
165

Table of Contents

Other manuals for Epson PowerLite 4750W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 4750W and is the answer not in the manual?

Epson PowerLite 4750W Specifications

General IconGeneral
BrandEpson
ModelPowerLite 4750W
CategoryProjector
LanguageEnglish

Related product manuals