EMP NS Connection Summary
11
EMP NS Connection Summary
There are two methods of connecting a computer and the projector via a
network by using EMP NS Connection.
Two Connection Modes and their Main Functions
Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, and
connects to an existing network system via a network cable.
When connecting to a network via Wired LAN, connect the projector to
the network hub with a commercially available LAN cable.
If you install the optional Wireless LAN unit in the projector, you can
connect to the network via a wireless LAN access point.
Quick Connection Mode (Only when the optional Wireless
LAN unit is installed)
Quick Connection Mode only runs when you install the optional
Wireless LAN unit in the projector.
Quick Connection Mode temporarily assigns the projector's SSID to a
computer creating an ad hoc connection, and restores the computer's
network settings after disconnecting. s p.13
• You can easily connect to a computer and project images from the
computer without making network settings.
• This lets you connect easily without a connector cable, and you can
connect even if the projector and the computer are at remote locations.
Main functions
You can make meetings and presentations by using the following
convenient functions.
To Next Page
Loading...
Need help?
General