Management Using SNMP
47
Management Using SNMP
By setting SNMP from the projector's configuration menu, notification
messages are sent to preset e-mail addresses when a problem or warning
occurs with a projector. This is useful when controlling projectors
collectively at a point distant from them. See your User’s Guide for more
information.
q
• SNMP should be managed by a network administrator or someone who is
familiar with the network.
• The SNMP function to monitor projectors requires SNMP Manager to be
installed on the computer.
• The managing function using SNMP cannot be used via a Wireless LAN in
Quick Connection Mode.
• Up to two destination IP addresses can be saved.
To Next Page
Loading...
Need help?
General