Epson PowerLite 825 Operation Guide

Using Multi-Screen Display
26
Adjust the Virtual Display
After starting EMP NS Connection, the setup of the virtual displays
varies between Windows and Macintosh. The procedures are explained
separately below.
q
Check the following points before starting EMP NS Connection when
connecting via Wireless LAN. If the following points are not set correctly,
Multi-screen display cannot be used.
• The SSID for the computer and each projector must be the same.
• The Wireless LAN system for the computer and each projector's Wireless
LAN card must be the same.
You can modify the SSID and Wireless LAN system for the projector from
the Network menu in the projector's configuration menu. See your User’s
Guide for more information.
Procedure
For Windows
A Select "Start" - "Programs" (or All Programs) - "EPSON
Projector" - EMP NS Connection to start EMP NS Connection.
B Select the "Use multi-display" check box.
Display layout and Display properties are added at the bottom of
the screen.

Epson PowerLite 825 Specifications

General

Brand	Epson
Model	PowerLite 825
Category	Projector
Language	English