Projecting Image Files
53
D The following operation returns you to the file list.
• While projecting still images: Press the [Esc] button.
Projecting all Image Files in a Folder in Sequence
(Slideshow)
You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Perform the Slideshow by the following
procedure.
q
To change the files automatically when you run Slideshow, set the Screen
switching time in the Slideshow Option menu to anything other than No.
Default setting: No s p.54
Procedure
A Start Slideshow. s p.50
The content of the connected digital camera or USB storage device
is displayed.
B Press the [ ], [ ], [ ], or [ ] buttons or the [w],
[v], [a], or [b] buttons on the Control panel to position the
cursor over the folder for Slideshow, and then press the
[Enter] button.
C Select Slideshow from the file list screen, and then press the
[Enter] button.
The Slideshow starts.
When the last file is projected, the file list is displayed again auto-
matically. If you set Continuous Play to On in the Option window,
projection will start from the beginning again when the end is
reached. s p.54
You can proceed to the next screen, return to the previous screen,
or stop playback during the projection of a Slideshow.
q
If the Screen switching time setting has been set to No, the files will not
change automatically when you Play Slideshow. Press the [Enter] or [d]
button on the Remote Control to continue to the next file.
To Next Page
Loading...
Need help?
General