Using Multi-Screen Display
28
• For Screen Resolution settings, see the following. s p.56
When the monitor icon is arranged, a virtual display is connected
as the image like below.
F Click the "OK" button. The Display Properties screen closes.
Next, allocate the images you want to project. s p.30
For Macintosh
A Start EMP NS Connection. Double-click the "Applications"
folder of the hard drive volume in which "EMP NS
Connection" is installed, and then double-click the EMP NS
Connection icon to start EMP NS Connection.
Select Advanced Connection Mode and then perform startup.
B Select the "Use multi-display" check box.
Display layout and Display preferences are added at the bottom of
the screen.
31
To Next Page
Loading...
