Epson PowerLite E20 - Setting the Date and Time

92
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status
light is on or flashing.
4. Close the projector's lens cover.
Parent topic: Using Basic Projector Features
Related references
Projector Light Status
Setting the Date and Time
You can set the date and time for the projector (PowerLite 992F/1288).
Note: If the Schedule Protection setting in the Password Protection screen is enabled, you cannot
change the date and time settings.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Operation setting and press Enter.
4. Select the Date & Time setting and press Enter.