Epson PowerLite Pro G5550 - Page 103

Using the Projector on a Network 103
From the Projector Control menu, select Web Remote. You see the
following screen:
■ The Power button turns the projector on and off.
■ The Search button searches for signal sources (see page 56).
■ The Computer button changes the input source to Computer1
(PowerLite G5450WUNL/G5750WUNL) or, with the
PowerLite G5550NL/G5650WNL/G5950NL, selects a
computer signal (connected to the
Computer1 or Computer2
port).
■ The Video button selects a video signal (connected to the Video1
or
Video2 port).
■ The S-Video button changes the input source to S-Video.
■ The LAN/USB button selects a network signal or a signal from
equipment connected to the USB port on the projector.
■ The BNC button changes the input source to BNC.
■ The HDMI/DVI-D button changes the input source to HDMI
(G5550NL/G5650WNL/G5950NL), or selects a signal from
equipment connected to the
HDMI or DVI-D port on the
projector (G5450WUNL/G5750WUNL).
Search button
S-Video button
LAN/USB button
Volume buttons
Computer button
Video button
A/V Mute button
Pause button
Power button
Page-up/down
buttons
Closed captioning
button
BNC button
HDMI/DVI-D
button