Using the Projector on a Network 109
4. To require a password for access to the initial Crestron
RoomView window, click
Enable in the User Password section
of the window, enter a password (in both the
New Password
and
Confirm boxes), and click Send.
5. To require a password for access to the
Tools tab, click Enable in
the
Admin Password section of the window, enter a password
(in both the
New Password and Confirm boxes), and click
Send.
6. When you’re through making settings on the
Tools tab, click
Exit.
note
Passwords you enter in the
User Password or Admin
Password
window sections
can contain up to 26
single-byte alphanumeric
characters.
To Next Page
Loading...
