Menu Settings and Description
Copy Settings Make the User Default Settings. The settings made in this menu are displayed as the default settings
in each mode. For details on the settings items, see the menu list for each mode.
& “Copy Mode” on page 105
& “Scan Mode” on page 107
Scan Settings
Fax Settings User Default Settings You can change the default settings for sending a fax. For more informa-
tion on the menus, see the following section.
& “Fax Mode” on page 107
Send Settings Auto
Rotation
*
Select On to rotate scanned documents 90 degrees
when an A4 or Letter size document has been loaded
long edg e first into t he ADF so that the document is sent
at A4 or Letter size.
If this option is disabled, the document is sent at A3 size.
If the recipient's fax machine does not support A3 size,
the document is automatically reduced in size.
This setting is not applied to color faxes and mono-
chrome faxes sent using the Direct Send function.
Batch Send
Select On to sort faxes waiting to be sent in the memory
by recipient, and then send them as a batch.
& “Using handy fax features” on page 90
Save Failure
Data
Select On to save faxes that failed to be sent in the
product’s memory. You can resend the faxes from Status
Menu.
& “Using the status menu” on page 99
Receive Settings Receive
Mode
& “Setting up the receive mode” on page 94
DRD See Step 7 in the following section.
& “Using the Fax Setting Wizard” on page 84
Rings to
Answer
& “Setting the number of rings to answer” on page 86
Remote
Receive
See the Note in the following section.
& “Receiving a fax manually” on page 98
User’s Guide
Menu List of Control Panel
113
To Next Page
Loading...
Need help?
General