Code Problem Solution
328
428
The destination was wrong or the destination did
not exist.
Check the entered folder path, the user name, and the password
is correct.
331 A communication error occurred while acquiring
the destination list.
Make sure the product is connected to the network correctly. For
details, see the Network Guide.
332 There is not enough storage space available to
save the scanned data in the destination storage.
Reduce the number of documents.
333 The destination could not be found because the
destination information has been changed
before sending the scanned data.
Select the destination again.
334 An error occurred while sending the scanned
data.
-
341 A communication error has occurred. Make sure the product is connected to the computer or network
correctly. For details, see the Network Guide.
When you are using Scan to Computer, make sure you have
installed Epson Event Manager.
& “Installing the software” on page 146
User’s Guide
Error Indicators
155
To Next Page
Loading...
Need help?
General