41
Wireless LAN Menu Settings
Setting Options Description
Connection Mode Quick
Advanced
Selects the type of wireless
connection:
Quick: lets you quickly connect
to local devices without an
internet connection
Advanced: lets you connect to
multiple computers via a wireless
network access point
(infrastructure mode)
Channel 1ch
6ch
11ch
In Quick connection mode,
selects the frequency band
(channel) used by the wireless
LAN
SSID Up 32 alphanumeric characters Sets the SSID (network name) of
the wireless LAN system the
projector is connecting to
Search Access Point To Search View Searches for available wireless
network access points in
Advanced connection mode
IP Settings — Turns on DHCP if your network
assigns addresses automatically;
set to Off to manually enter the
network's IP Address, Subnet
Mask, and Gateway Address
(see list of restricted IP
addresses in link below)
SSID Display On
Off
Selects whether to display the
SSID on the network standby
screen and the Home screen
IP Address Display On
Off
Selects whether to display the IP
address on the network standby
screen and the Home screen
To Next Page
Loading...
Need help?
General