Epson ProSense 17 - Controlling Music Playback

40
Your watch uses your heart rate and GPS measurements to accurately calculate the VO
2
max under the
following conditions:
• Your profile information must be set up correctly.
VO
2
max is only measured in Run Mode.
• Your watch is connected to GPS and you run with the watch for at least 10 minutes.
• You turned on heart rate measurement and the AT Pause setting is turned off.
• Your running pace is 16 min/mile (10 min/km) or faster.
• You are running at an elevated heart rate at moderate intensity.
Your watch cannot accurately estimate the VO
2
max if the following occurs:
• You stop running before 10 minutes have elapsed.
• Your heart rate cannot be measured.
• Your running speed slowed to a walk or you stopped for a traffic signal, and your heart rate dropped
too low for estimation.
Parent topic: Measuring Workouts
Related references
Measurement Screen Menus
Related tasks
Measuring Your Heart Rate
Controlling Music Playback
You can play audio on your smartphone and control it with your watch via a Bluetooth connection.
Note: On Android, you need to leave the Epson View app running in the background on your
smartphone to use the audio playback controls.
Note: You cannot use this feature when you have paired your watch with the heart rate monitor chest
strap to monitor your heart rate (ProSense 17).
1. At the Time screen, press and hold the Back button for at least 2 seconds.