57
Registering the Heart Rate Chest Strap
Before using the heart rate chest strap, you must attach the strap and pair it with your watch. Before you
begin, make sure there are no other heart rate chest straps in the surrounding area.
1. Attach the heart rate chest strap to your chest.
2. Turn on your watch and press the Enter button.
You see this screen:
3. Press the Enter button to select Bluetooth.
4. Select HR Strap > Register.
You see a screen like this:
5. Select the name of the heart rate chest strap and press the Enter button.
Your watch registers the heart rate chest strap and returns to the HR Monitor screen.
Note: If you cannot register the heart rate chest strap, try resetting it. If that does not work, you may
need to replace the battery in the heart rate chest strap.
6. Press and hold the Back button for at least 2 seconds to return to the Time screen.
To Next Page
Loading...
