Epson RC180 Safety And Installation

5. General Maintenance
RC180 Safety and Installation Rev.18
88
5. General Maintenance
This chapter describes maintenance inspections and procedures. Performing
maintenance inspections and procedures properly is essential for preventing
trouble and ensuring safety.
Be sure to perform the maintenance inspections in accordance with the schedule.
5.1 Schedule for Maintenance Inspection
G / C3 / RS series
Inspection points are divided into five stages: daily, monthly, quarterly, biannual,
and annual. The inspection points are added every stage.
If the Manipulator is operated for 250 hours or longer per month, the inspection
points must be added every 250 hours, 750 hours, 1500 hours, and 3000 hours
operation.
Daily Monthly Quarterly Biannual Annual
1 month(250 h) √
2 months(500 h) √
3 months(750 h) √ √
4 months(1000 h) √
5 months(1250 h) √
6 months(1500 h) √ √ √
7 months(1750 h) √
8 months(2000 h) √
9 months(2250 h) √ √
10 months(2500 h) √
11 months(2750 h) √
12 months(3000 h) √ √ √ √
13 months(3250 h)
Inspect every day
√
… … … … … …
h = hour

Epson RC180 Specifications

General

Brand	Epson
Model	RC180
Category	Controller
Language	English