Epson RC90 Series - Page 47

Maintenance 7. Option Parts Replacement Procedures
RC90 Series Maintenance Rev.1 35
(8)
Secure the L-shaped plate and Option Board
with
the attachment screws.
(9)
Mount the clamp of the power cable.
(10)
Mount the Top Panel.
For
LS3-B, LS6-B: Mounting screw ×10
For LS10-B, LS20-B, LS6-B602S-V1: Mounting screw ×6
(11)
Connect the power plug. Turn ON the Controller and make sure that the Controller
starts properly without any vibration or abnormal noise.