Epson RC90 Series - Restore

Maintenance 4. Backup and Restore
RC90 Series Maintenance Rev.1 11
4.4 Restore
Restore the Controller status from the EPSON RC+ 7.0.
CAUTION
■
Make sure that the data used for restore was saved previously for same
Controller.
■
Do not edit the backup files. Otherwise, operation of the robot system after data
restoration to the Controller is not assured.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller Tools]
dialog.
(2) Click the <Restore Controller…> button to display the [Browse For Folder] dialog.
(3) Specify the folder that contains the backup data. Backup data folders are named using
the following format:
B_controller model_serial number_data status was saved
→ Example RC90-B : B_RC90-B_12345_2013-10-29_092951
Data saved with the Controller status storage function can also be specified for restore.
Specify the following folder.

NOTE