Epson RC90 Series - Dpb

Maintenance 8. Maintenance Parts Replacement Procedures
RC90 Series Maintenance Rev.1 51
8.8 DPB
DPB
Removal
(1)
Turn OFF the Controller.
(2)
Disconnect the power plug.
(3)
Remove
the Top Panel.
For LS3-B, LS6-B: Mounting screws ×10
For LS10-B, LS20-B, LS6-B602S-V1: Mounting screws ×6
(4)
Remove the MDB.
Refer to: 8.5 MDB
(5)
Disconnect the
connectors from the DPB.
For LS3-B, LS6-B
: Connectors × 6
For LS10-B, LS20-B,
or LS6-B602S-V
: Connectors × 8
(6)
Only f
or LS10-B, LS20-B, or LS6-B602S-V.
Remove the rear plate from the
Controller.
M
ounting screws × 7
(7)
Unscrew the DPB mounting screws.
For LS3-B, LS6-B:
: Mounting screws × 9
For LS10-B, LS20-B, LS6-B602S-V1:
: Mounting screws × 12
(8)
Remove the DPB from the Controller.