Epson SC-F500 Series

Settings item Settings value
Remove Display the removal method
Feed/Cut Paper Backward, Forward, Cut
Media Adjust Start
Advanced Media Setting
Platen Gap 1.6, 2.1, 2.6
(This is displayed when Custom Paper is selected in Paper Type.)
Top/Bottom Margins Standard, Top 3 mm/Bottom 3 mm, Top 15 mm/Bottom 15 mm, Top
45 mm/Bottom 15 mm
Back Tension Auto, Standard, High, Extra High
Drying Time
Drying Time per Pass 0 to 10.0 sec
Drying Time per Page 0 to 60 min
Auto Cut On, Off
Manage Remaining Amount
Setup On, Off
Remaining Amount 5.0 to 150.0 m
Remaining Alert 1.0 to 15.0 m
Change Paper Type
Paper Type
General Purpose/Textile Display supported paper types
General Purpose/Rigid
01
Others
Auto Sheet Feeder
Media Adjust Start
Change Paper Type/Paper Size
Paper Type
General Purpose/Textile Display supported paper types
General Purpose/Rigid
01
Others
Paper Size Display supported paper sizes
SC-F500 Series User's Guide
Using the Menu
77