General Settings - Printer Settings
*Default setting
Settings item Settings value Explanation
Paper Source Settings
Error Notice
Paper Size Notice On
Setting this to On will display an error message when the output size
or paper type settings of print jobs sent to the printer differ from
those settings in the printer.
Off
*
Paper Type Notice On
Off
*
Roll Paper Setup
Detect Paper Me-
andering
On
*
If On is selected, an error will be displayed in the control panel and
printing will stop if the paper is skewed; select Off to disable this
feature. On is recommended in most circumstances as skewed paper
may cause the printer to jam.
Off
Print Cutting
Guideline
On If Auto Cut is Off, you can choose to print (On) or not print (Off) cut
lines on roll paper. Cut lines are not printed if Auto Cut is On or when
cut sheets are used.
Note, however, that if the roll width selected with the computer is
narrower than the paper loaded in the printer, cut lines will be printed
regardless of the option selected for Auto Cut.
The setting selected with the printer driver takes priority when the
printer driver is used.
Off
*
After-Print Options
Hold Paper
*
After printing, select whether the printer should grip the trailing edge
of the cut sheet or auto cut roll paper in the eject slot (Hold Paper), or
allow it to be fully ejected (Eject Paper). To prevent the print surface
from being scratched when the paper is ejected and it drops down,
we normally recommend using Hold Paper.
When using Hold Paper, manually pull the edge of the paper out of
the printer so that the paper does not drop down.
Eject Paper
SC-F500 Series User's Guide
Using the Menu
93
To Next Page
Loading...
Need help?
General
