Epson SC-F6400 Series

Item Parameter Explanation
Network Settings
Network Status Wired LAN Status You can check batches of a variety of information in network settings
that are set in Advanced.
When Print Status Sheet is selected, a list is printed.
Print Status Sheet
Advanced
Device Name Do a variety of network settings.
TCP/IP Auto
Manual
Proxy Server Do Not Use
Use
IPv6 Address
Enable
*
Disable
Link Speed & Du-
plex
Auto
*
100BASE-TX Auto
10BASE-T Half
Duplex
10BASE-T Full
Duplex
100BASE-TX Half
Duplex
100BASE-TX Full
Duplex
Redirect HTTP to
HTTPS
Enable
*
Disable
Disable IPsec/IP Filtering Use the pre-installed software Web Config to enable this setting.
You can only disable the setting from here.
See the following for detailed information on starting Web Config.
U “Using Web Config” on page 32
Disable IEEE802.1X
Media Settings Menu
* indicates default settings.
Item Parameter Explanation
Current Settings
SC-F6400 Series/SC-F6400H Series User's Guide
Control Panel Menu
78